Product Highlights • Plug A: EXT 1B 7 pin male angled plug  • Plug B: 4 port D-tap female outlets • Draws power from EXT socket of ARRI Alexa Mini camera • Output 14.8V/10A max. No voltage regulator  • Maximum cable length: approx. 40cm • Braided cable orange color Product Description • This power splitter adapter can power 4 of devices from a single EXT output. This can reduce cable clutter.  • Each cable is fabricated with the highest quality components and is 100% continuity tested prior to shipping.   Net Weight: 70.7 g   Package Included: 1 * ARRI Alexa Mini Camera EXT 7 Pin To D-tap 4 Port Power Splitter Adapter Box 

Product Highlights • Professional Neutrik XRL connectors audio cable  • Plug A: angled XLR 3 pin female  • Plug B: angled XLR 3 pin male  • Cable length: 50cm   Product Description • Built with high quality Neutrik XLR male to female connector is ideal for the equipment with 3-pin XLR connectors such as microphones, studio harmonizers, mixing boards, patch bays, preamps,speaker systems, stage lighting, etc.  • Each cable is fabricated with the highest quality components and is 100% continuity tested prior to shipping.     Net Weight: 76 g   Package Included: 1 x Low Pofile XLR Plug Neutrik 3 Pin Male XLR to 3 Pin Female XLR Cable

Product Highlights • Timecode cable for RED Komodo  • Plug A: right angle 9 pin male • Plug B: straight BNC • Cable length: 53cm   Product Description • This timecode cable enables you to send timecode from Zaxcom to Red Komodo camera. • Each cable is fabricated with the highest quality components and is 100% continuity tested prior to shipping. Please contact us if the cable you received is defective or doesn't work. we'll solve the problem properly or send you a new replacement at once.  Net Weight: 31.5 g   Package Included: 1 x  RED Komodo Timecode Cable BNC Male to EXT 9 Pin Male Right Angle For Sound Devices ZAXCOM

Product Highlights • Easync sync timecode cable for Sony FS7  • Plug A: right angle 3.5mm mini jack • Plug B: 3 pin XLR male • Cable length: 53cm   Product Description • Each cable is fabricated with the highest quality components and is 100% continuity tested prior to shipping. Please contact us if the cable you received is defective or doesn't work. we'll solve the problem properly or send you a new replacement at once.  Net Weight: 48.8 g   Package Included: 1 x Easync Sync Timecode Cable For Sony FS7 XLR 3 Pin Male To Angled 3.5mm Mini Jack

Product Highlights • Plug A: 7 pin male angled plug  • Plug B: double D-tap female plugs • Draws power from EXT socket of ARRI Alexa Mini camera • Maximum cable length: approx. 30cm Product Description • Power your ALEXA MINI Camera with battery that comes with D-tap power output plug. • Each cable is fabricated with the highest quality components and is 100% continuity tested prior to shipping.   Net Weight: 58.3 g   Package Included: 1 * ARRI Alexa Mini Camera EXT Power Cable Right Angle Male 7 Pin To Double D-tap Female

Product Highlights • For iPhone Android smartphones • Connects TRS 3.5mm microphone to TRRS smartphone • 3.5mm male to 3.5mm female    Product Description • It is used to connect your standard TRS (3-pole) 3.5mm microphone to your TRRS (4-pole) smartphone.  • It allows to connect wireless microphones, lavalier microphone, and any other microphone to your iPhone or Android smartphones tablets.  • Each cable is fabricated with the highest quality components and is 100% continuity tested prior to shipping.     Net Weight: 6 g   Package Included: 1 x 3.5mm Plug TRS To TRRS Microphone Adapter Audio Extension Cable

Product Highlights • D-Tap Male Connector to 4-port Female Connector • Max Work Current: 10A in Total • Coiled Spring Cable Can be Stretched to Max 120cm • Works Great for External Monitor/on-camera Light/Wireless Receiver • Compatible with Gold & V-mount Camera Battery • Comes with formfitting backboard cheese plate  Product Description  • The power tap receptacle is perfect for powering multiple wireless receivers, external monitors, LED lights from a V-mount camera battery. You can expand any power tap to accommodate up to four separation with the splitter adapter. Net Weight: 166.7 g Package Included: 1 × D-Tap Male to 4-Port D-Tap Female Cable Splitter 1 × Formfitting Backboard Cheese Plate  2 × 1/4" Thread Screw  1 × Allen Wrench  (Note: The coiled spring cable can't shrink if fully stretched.)

Available ports include: ❶ R/S (3pin) Simple runop of the handle trigger box, simple 3-pin trigger cable, etc. No power available Devices like ARRI WCU-4 may require a CTRL port interface with cable K2.0015758 pin1:GND, pin2:N/C, pin3:GPI ❷ Time code (0B 5pin) Standard wiring of time code input/output pin1:GND, pin2:LTC-IN, pin3:N/C, pin4:N/C, pin5:LTC-OUT ❸ CTRL (00B 4pin) RED CTRL standard wiring pin1:GND, pin2:UART-RX, pin3:GPO, pin4:UART-TX ❹ 5V (USB) 5V available, maximum 500mA May need to enable power in the camera menu ❺ Genlock (BNC) Standard wiring for genlock Center: signal, shell: GND ❻ EXT input/output, one EXT 0B9 pin output is reserved to ensure that the original cable can continue to be used. Product Description • B-Box (RED KOMODO) is connected to the BP-9 battery slot on the right side of the camera and provides a breakout cable for the EXT connector of the camera. Battery Slide Pro V-Mount or Gold Mount for RED KOMODO can be used at the same time. Customized right-angle 360-degree rotating elbow connectors allow neat cable operation. When using the B-Box, the Canon BP-9 battery can also be installed in the slot on the left side of the camera, or fixed on the device with a 1/4" screw. Net Weight: 120.5 g   Package Included: 1 × B-Box For RED KOMODO EXT9-pin Splitter-R/S (3pin) Time Code (0B 5pin) CTRL (00B 4pin) 5V (USB) Genlock (BNC)

Product Highlight • 12G BNC male to female SDI protector isolation cable  • Passing Through 2K • Anti-burn protector cable for ARRI Mini / RED Komodo • Prevents current breakdown SDI protection device • Cable length : 28cm   Product Description • Function: We installed a circuit board chip in the shell to protect the SDI output. By isolating the current from the BNC male connector to the BNC female connector, the same transmission effect can be achieved through the same frequency. Prevent the current passing through the SDI line from breaking down the machine SDI. Such accidents are very common in ARRI mini and Komodo. Net Weight: 59 g   Package Included: 1 × 12G BNC SDI Protector SDI Anti-current Isolation Cable For ARRI Mini / RED Komodo Cameras (Red)

Product Highlight • 7-pin RF motor to RED Komodo/ V-RAPTOR EXT9-pin RUN/STOP cable • Plug A: D-TAP • Plug B: RED EXT 9PIN • Plag C:  CAM (7p) • Cable length : 61cm   Product Description • This cable is designed to connect an ARRI cforce RF lens motor, cmotion cPRO lens motor, or cmotion cPRO camin to your RED Komodo. • Because the EXT has no power, so it needs to provide power for the boot cable separately, so after inserting the two sockets, you need to plug in the D-tap port to power it to boot normally. Net Weight: 69.4 g   Package Included: 1 × ARRI cforce RF Motor / cmotion cPRO Motor And camin CAM (7p) to RED Komodo V-RAPTOR EXT9pin and D-tap Power and RUN/STOP Cable

Product Highlights • For Select Fujifilm camera • Enables the Use of V-Mount Batteries • Accepts 7.4-8.4V Input Power • 5.5/2.5mm Connector • Cable Length: 40.15"    Product Description • This NP-W126S Dummy Battery can be used to power Fujifilm cameras with a V-mount battery. It enables you to use the longer-lasting V-mount batteries instead of the smaller batteries. • The dummy battery fits into the camera's battery slot and connects to the DC-out port on the V-mount battery plate with a 2.5mm DC plug. • Compatible with: Fujifilm X-H1, X-Pro2, X-Pro1, X-T3, X-T2, X-T1, X-T30, X-T20, X-T10, X-T100, etc.   Net Weight: 30 g   Package Included: 1 x NP-W126S Dummy Battery

Product Highlights • For Select Sony camera • Enables the use of V-mount batteries • Accepts 7.4-8.4V input power • 5.5/2.5mm connector   Product Description • This NP-FW50 Dummy Battery can be used to power Sony cameras with a V-mount battery. It enables you to use the longer-lasting V-mount batteries instead of the smaller batteries. • The dummy battery fits into the camera's battery slot and connects to the DC-out port on the V-mount battery plate with a 2.5mm DC plug. • Compatible with:  Sony A7 / A7 II / A7R /A7R II / A7S / A7S II/A7M / A7M II / A3000 / A5000 / A5100 / A6000 / A6100 / A6300 / A6400 / A6500 / NEX 5 / NEX 7 / DSC-RX10 / RX10II / RX10III / RX10IV.   Net Weight: 33 g   Package Included: 1 x NP-FW50 Dummy Battery